Welcome to Mobile Phone Guide

If you like to repairing your own mobile phone without using help from third party or service center, here you can find the mobile phone tips and tricks. Unlocking mobile phone, Flash mobile phone, mobile phone schematic, SIM solution, no signal, LED ways, keypad solution, mic and speaker solution and many jumper ways. Many repair tips and tricks from Nokia, Samsung, Motorola, Sony Ericsson, Sharp, LG, Siemens, I-mobile, Chinese mobile phone and other brand. Also you can view many mobile phone secret code here. Feel free to browse our content. Have a Nice Day! :)

Samsung V200 Camera Problem Solutions

Camera repair for Samsung V200, below the picture :

Samsung 2100 No Speaker Solution

Here is the solution for Samsung 2100 no speaker problem :

LG-600 GSM Phone Service Manual



Complete service manual for LG-600 include:

- Performance
- Keypad
- Assembly
- Datakit
- PCB Diagram
- Block Diagram
- Schematic Diagram
- Exploded View
- RPL

DOWNLOAD LG-600 GSM Phone Service Manual HERE:
http://www.ziddu.com/.../LG-600.zip.html


Related Posts:
1. LG 2G and 3G Service Codes
2. LG KG300 Auto Off Solution

Upgrade XDA II from WM03 to WM05 or WM06 Step by Step Guide

Hardware:
- PC/laptop
- Cradle Data Cable

Software:
- nk.nbf
- HimaUpgradeU.exe
- HimaClearJumpCode.exe
- HimaGetDeviceData.exe

Step by Step:
- Bootloader your Device (DPad + PowerButton + ResetButton)
- When SERIAL show on the screen
- Plug on Cradle
- SERIAL will change to USB
- Click HimaUpgradeUt.exe
- Click Next
- Wait until upgrade process done
- After upgrade process done, remove from Cradle
- Then Hard Reset (Press and Hold Camera Button+Record+Reset)
- Then Clear Storage (Enable KITL > NO, Clean Registry Hive >YES, Format Storage > YES)

Good luck!

Mega Antina Switch - NOKIA


Mega Antina Switch
Complete collection antenna switch for Nokia mobile phone.

Include:

Nokia 1100, 2300 on 900 Mhz and 1800 Mhz Antenna Switch
Nokia 3310, 3330, 3410 on 900 Mhz and 1800 Mhz Antenna Switch
Nokia 3230 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 3220, 6020 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 3100, 6100 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 3650, 3660 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 3510 Antenna Switch
Nokia 6070 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6101 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6111 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6210, 6310 Antenna Switch
Nokia 6220 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6230 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6260 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6600 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6610, 7210 Antenna Switch
Nokia 6610i, 7250 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6630 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 6680, 6681 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 7610, 6670 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 7360 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 7260 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia 7250, 7250i Antenna Switch
Nokia 8310, 6510 Antenna Switch
Nokia 8210 Antenna Switch
Nokia N-Gage QD on 900 Mhz and 1800 Mhz Antenna Switch
Nokia N-Gage on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia N91 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia N72 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch
Nokia E60 on 900 Mhz, 1800 Mhz and 1900 Mhz Antenna Switch

DOWNLOAD Mega Antina Switch HERE :
http://www.ziddu.com/.../Mega_Antina_Switch.rar.html

Infinity-Box July 2008 Updates

14 Jul 2008: "ChineseMiracle" v2.51:
.security area repair improved (36 new firmwares supported)
."touchscreen calibration" operation improved
.minor bugs fixed
.security area repair improved (19 new firmwares supported)
."touchscreen calibration" operation improved
.security area repair improved (25 new firmwares supported)
."touchscreen calibration" operation improved
.security area repair improved (86 new firmwares supported)
.security area repair improved (80 new firmwares supported)
."touchscreen calibration" operation improved
.security area repair improved (46 new firmwares supported)
.security area repair improved (7 new firmwares supported)
.NAND operations improved
.repaired imei history added
."touchscreen calibration" option added
.security area repair improved (50 new firmwares supported)
.new flash chip types supported
.security area repair improved (35 new firmwares supported)
.new flash chip types supported
.security area repair improved (38 new firmwares supported)
.NAND operations bugs fixed
.security area repair improved (44 new firmwares supported)
.new flash chip types supported
.security area repair improved (33 new firmwares supported)
.security area repair improved (43 new firmwares supported)
.security area repair improved (49 new firmwares supported)
.MT6223, MT6225 test mode, "safe format", ffs manage, user code/unlock operations improved
.security area repair improved (47 new firmwares supported)

15 Jul 2008: "LgA" v1.31:
.KG208, KP230, KP235, C1200 models in test
.KP130, C3310 models supported
.B2150 model supported
.flash process improved
.flash chip detection improved
.MG295, KG291i models supported

15 Jul 2008: "MModule" v2.26:
.LG-KP220, Zonda-1075, Zonda-1085, MyPhone-S21 models in test
.Dirland-R100, Spice-S300, Simoco-SM611 models supported
.Gradiente-GF910 operations improved
.IMobile-318, IMobile-520 models supported
.SkyZen-EZ700 operations improved
.Fly-M130 operation bugs fixed
.Fly-LX610, Fly-M130, Fly-Levis-LV1, Micromax-X1u, Alcatel-V770, Lenovo-V800 models supported
.SkyZen-EZ500 operations improved
.Fly-SX200, Spice-S600N models supported
.Bleu-555x, Bleu-354x, Simoco SM322, SM633, Fly-MC100, Lenovo-i908
.Spice-S808, Spice-S415, Lenovo-i706 models supported
.AK-Mobile AK900 model supported
.Bird-V708 model supported
.Fly-2080 operations improved
.Simoco-SM1000 operations improved
.new flash chip types supported
.Alcatel operations improved
.SkyZen-EZ700 model supported
.Fly-V60 model supported
.SkyZen-EZ100 model supported
.Orange Tokyo operations improved
.Fly-SX200 model in test

16 Jul 2008: "AModule" v1.31:
.Aiko-78G model supported
.ZTE-A12, A12+, A15, A16, A37, A39, A80, 2010, WP626, Coral-300 imei repair function added

16 Jul 2008: "HModule" v1.22:
.Alcatel-S210 model supported
.MyWay-MW200, UTStarcom-GPRS568 models in test
.minor bugs fixed
.Motorola-W377 model supported
.TOCS-C64 model supported
.Konka-C625 "imei" option released
.Sony-Ericsson T280 model supported
.Alcatel V270 model supported
.VLE5 imei option released
.Alcatel-E227 model supported
.Telit-T250 model supported
.Voxtel 1iD, 2iD models supported
.Voxtel, Lobster, Audiovox, UTStarcom repair
.Alcatel-E221 model supported
.Alcatel-E201 model supported
.Alcatel-E101, E207 unlock improved

Using Cruiser - CID 49/51/52 Patch Unlocking Guide

CID 49/51/52 patch unlocking.

Check your phone, make sure that you have phone with CID 52
Then open your cruiser, connect your phone with DCU-60 cable.

Step by step:
1. Use DCU-60 cable.
2. Attach phone
3. Flash FS
4. Unlock RSA
5. Flash Main FW
7. Direct unlock
8. Matching FS flash file
9. Customize FS
10.Turn off phone

And your phone will unlocked.
Note : If your phone with CID 51, 50, 49, you have to upgrade the GDFS to CID 52

Here step by step upgrade CID?
1. Attach phone with DCU-60 cable
2. Go to GDFS tab
3. Check upgrade to CID 52
4. Push the button modify GDFS
5. Dettach the phone
6. Remove battery for 5 minutes
7. Reconnect again and your phone will be CID 52 and you can do the unlock steps

Siemens C, CX, M, S-6, 7 Solutions and Ways

Siemens C, CX, M, S-6, 7 ways :


Siemens C60 LED Problem Solutions and LED Ways

LED solutions and LED ways for Siemens C60 :


Siemens C35 Charging Problem Solutions

Charging solutions for Siemens C35 :


Siemens C35 Ringer Problem Solutions

Ringer Solutions for Siemens C35 :


Siemens C35 Audio Problem Solutions

Audio Solutions for Siemens C35 :


LG 2G and 3G Service Codes

Here is All LG 2G and 3G service codes :

ALL LG 2G and 3G GSM mobile phones Service codes for Security lock reset and service tests/software version check, etc.

ALL LG 2G : 2945#*#
8110 & 8120 : 277634#*#
U8130 & U8138 : 47328545454#
8180 old sw : 49857465454#
8180 new sw : 492662464663#
8330 : 637664#*#
8360 : *6*41*12##
8380 : 525252#*#

NOKIA 6670, 7610 Keypad Solution [ NEW ]

New solution for Nokia 6670 and 7610 keypad problems :


Siemens MC60 Bad Cut Repair Solution

Siemens MC60 bad cut repair solution :


Siemens A55 PC Audio LCD Ways

Here is Siemens A55 PC Audio LCD solution :


Siemens A55 Audio Connector Ways

Audio connector ways for Siemens A55 :


Siemens C60 Keypad Ways and Jumper Solution

Below is Siemens C60 keypad ways and jumper solution :


Siemens C60 Audio Ways and Jumper Solution

Here is Siemens C60 audio ways and jumper solution :


Panasonic GS87 Sim Ways

Here is Panasonic GS87 Sim Ways :

Panasonic GD93 Dead Phone Solution

Totally dead phone solution for Panasonic GD93 :


Panasonic X70 Charge Ways Jumper Solution

Charge ways for Panasonic X70 :

Panasonic GD55 Antena Switch Solution

Antena switch solution for Panasonic GD55 :

Panasonic GD55 Manual Picture

Manual picture Panasonic GD55 :




Related Posts:
1. Panasonic GD90 Manual Picture

Panasonic GD90 Manual Picture

Manual picture Panasonic GD90 :




Related Posts :
1. Panasonic GD55 Manual Picture

Motorola C650 No Charging Solutions

No charging solutions for Motorola C650 :


Motorola V3 Keyboard / Keypad Solution

Here is Motorola V3 keypad solutions :


Motorola V3 No Charging Solution

Solution for Motorola V3 no charging problem:


Motorola V3 LCD Problem Solutions

Here the solution for Motorola V3 LCD problem:



Motorola E1000 Power Switch Solution

Solution for Motorola E1000 Power Switch problem:


Motorola V3 Mic Solution

Mic ways for Motorola V3 :


Other Mobile Phone Service Code

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#


Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
software version: *01763*79837#


Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)


Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
M100 software version: ####0000#


Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send


Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#


ZTE Mobile:
1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard


Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Turn Your BlackBerry Into a Supertool With These Guides

Guides

Learn how to turn your BlackBerry into a supertool with these guides.

1. BlackBerry on Crack: 25 Tools to Supercharge Your Lifeline: This guide offers useful tools for BlackBerry business users and more.
2. BlackBerry Software and Utilities: If you’re looking for any aftermarket BlackBerry tweaks, this is the place to start.
3. Mac OS X Tethered Modem Solution for BlackBerry: Find out how to use a BlackBerry as a modem in OS X.
4. Voice-to-Text Voice Mail Services and Third-Party Alpha Pager Dispatch Services: Check out these services that will transcribe your BlackBerry voice mails.
5. What Are the Methods of Receiving Email on BlackBerry?: Read this article to figure out your email options.
6. BlackBerry for the Deaf and Hard of Hearing: This article explains why BlackBerry devices are great for those who are hearing impaired.
7. The Agony of “BlackBerry Thumb”: Learn about BlackBerry-related thumb pain and what you can do about it.
8. Why BlackBerry?: Find out why the BlackBerry is a superior choice for some people.
9. BlackBerry HTML Web-Browsing FAQ: Get the lowdown on HTML browsing here.
10. Basic BlackBerry Etiquette: Here, you’ll find a basic list of dos and don’ts for being a polite BlackBerry user.
11. Buying a BlackBerry on eBay: Check out this guide to learn how to avoid getting scammed when purchasing a BlackBerry from a seller on eBay.
12. Implementing GTD with Your BlackBerry: This guide recommends applications and more items for helping you get things done on the BlackBerry.
13. Transfer a File Using Bluetooth Technology Between Two BlackBerry Smart Phones: This guide will show you how to transfer files easily.
14. Gmail Receiving “Sent Items” You Send On Your BlackBerry: Learn how to turn off this syncing feature for Gmail and more.
15. BlackBerry Chat Apps/FAQ: Learn about awesome IM (instant messaging) applications and more in this guide.
16. Remove an IT Policy from a BlackBerry: Here, you’ll find out how to rid yourself of a pesky IT policy.
17. Easy BlackBerry Backup: Use this guide to back up your BlackBerry in just a minute.
18. The First 10 Things You Should Do With Your New BlackBerry: Before you do anything else with your BlackBerry, do these 10 things.
19. Appear to Be in the Office While Actually Working from Home: Fool everyone by making these tweaks using your BlackBerry and more.
20. BlackBerry Messenger: What Is It and How Does It Work?: Get the lowdown on this BlackBerry-to-BlackBerry messaging service.
21. Maximize the Battery Life of Your New BlackBerry: Follow this tutorial to learn how to get the most out of your battery.

Service Codes SAMSUNG

Samsung service code :

E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx :
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG :
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send

SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka :
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar :
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola :
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice :
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Solution SAMSUNG E730 Keypad Problem

Samsung E730 keypad problem solutions :


SAMSUNG X150 Keypad Problem

Solution for Samsung X150 keypad problem :


Samsung E630 Keypad Solution

Keypad solution for SAMSUNG E630 :



Samsung E900 Keypad Solution Manual

Keypad problem on Samsung E900 solutions :


Samsung E800 Keypad Solution Manual

Have a keypad problem on Samsung E800? Here is the solution :


Tutorial - How To Easily Unlock OTB 1.1.2 and 1.1.3

How to easily unlock OTB 1.1.2 and 1.1.3

This tutorial is old and should only be used in case you have problem with the "ZiPhone" method.

http://www.downloadziphone.org/
Yes, this is yet another tutorial, but as usual i have done stuff to make the progress even easier.

Edit: Everyone is asking about this - if you follow THIS tutorial:
- BSD Subsystem is NOT necessary
- Oktoprep is NOT necessary (it's done automaticly after unlock)

The tutorial is also posted on http://iphone.unlock.no/OTB112unlock.htm

Don't do this if you phone has 3.9 bootloader. Do it if your phone shown this image first time you started it (meaning it had 1.1.2/3 and bootloader 4.6). If your phone had a picture of the earth when you started it first time, follow instructions here instead.

Note: This method is developed by George Hotz, as you can see in his blog. You can send him a donation by paypal to geohot@gmail.com.


Step 1: Install 1.1.1 firmware

If your phone is already activated on any other firmware you can skip this and the next step. But you would need to add http://i.unlock.no/ as a source in Installed manually.

To get 1.1.1 firmware installed, you must get the phone enter recovery mode. Here's how:

  1. Connect the phone to the computer and press and hold the Power button (on top) and the Home button (on bottom front) simultaneously.
  2. After about 15 seconds phone will appear to turn off, release the Power button but keep holding the Home button.
  3. After about 15 seconds the computer and iTunes will detect the phone in recovery mode. Screen should be black (off).
  4. Download the following two files to your computer if you havent alread: 1.1.1 firmware and 1.1.2 firmware
  5. Hold down SHIFT key (Windows) or Option/ALT-key (Mac) when clicking the Restore button in iTunes, and it will let you choose firmware file. Select the 1.1.1 firmware file you downloaded in previous step.
  6. iTunes will give give a 1015 error, and you phone will get stuck in recovery mode.
  7. To get it into normal mode, run AppTapInstaller.exe (or iNdependence if your're on a Mac). If you are downgrading from 1.1.3 you might have problems getting it started in normal mode. The solution is simple, just restore your phone to 1.1.1 again, and this time it will work
  8. Now your phone should be at the activation screen.
Step 2: Jailbreak and activate
  1. Make sure you have a SIM-card with PIN turned off (the supplied AT&T card works fine).
  2. On the activation screen, slide for emergency and dial: *#301# to make the phone call itself.
    (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
  3. Answer the call, and tap on Hold
  4. Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
  5. Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
  6. Your contact now has two "web pages" - tap on the first one (prefs: ). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General --> Auto-Lock --> Never.
  7. Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no
  8. Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
  9. Phone will return to activation screen and after a few seconds the phone should restart.
  10. If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
  11. When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)
Step 3: Performing the unlock

Add http://i.unlock.no/ to Installer sources if you didn't follow this tutorial
  1. Tap on the Installer icon, and wait for it to refresh the sources
  2. Tap on Install at the bottom
  3. Scroll down to Unlocking Tools and install 1.1.2/1.1.3 OTB Unlock
  4. The process will take a few minutes, before you get a message that it completed successfully
Step 4: Upgrade to 1.1.2

Even though the phone is already unlocked, it will not get a signal. To fix this upgrade to 1.1.2:
  1. Open iTunes again and hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the 1.1.2 firmware file you downloaded previously.
  2. While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.
  3. If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup
  4. When your phone is done upgrading, and shows the Slide for emergency screen, you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.
  5. An application should appear, with a "Jailbreak" button - click on it and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.
  6. Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.
Step 5: Finishing the unlock

Now your phone will accept any SIM-card and you will get signal. Congratulations!
But if you are using your phone in a forreign country, the Phone/SMS application will just crash.

Open Installer and install iWorld found in the Tweaks 1.1.2 category. Start iWorld and select your country and it will fix the crashing problem.

If you want to upgrade to 1.1.3, there's a package called Official 1.1.3 Upgrader located in the System category. Installing it will upgrade your phone to a jailbroken 1.1.3. Be aware that it will take some time (15-40 minutes).

LG KG300 AUTO OFF Solution

This is for those who need it. I have been lookin still many peoples not able to set this problem.

KG300 auto off solution

  1. Download devin too attached
  2. Download special reset file attached.
  3. Download flash file attached.
  4. Download flash software attached.
  5. Cable pinout attached.
  6. Connect handset in devin tool, when connect select reset file and reset bluetooth, security, and phone reset etc.
  7. Only after reset your phone will be all ok. But its better to full flash.
  8. Full flash using any professional software or using leo.
  9. After full flash 2945#*# and do factory reset.
  10. Enjoy

Here is for the pinout cable:

Iphone - SMS Recieved From Internet is Scrambled Problem

SMS recieved from internet is scrambled/not working?

For some ridiculous reason, Apple did not add real support for the SMS standard. The result is that SMS sent with a alphanumeric/non standard number will either not be recieved at all or the text will get scrambled as shown on the screenshot below. This bug may even damage the SMS database on your phone. It took Apple some time, but in 1.1.2 it's finally fixed, so we can just use the phone application from 1.1.2 on 1.1.1 (1.0.2 or older is not supported currently). Thanks to saraf_suman for telling me that.

How to fix the SMS problem easily:

  1. Open installer, and tap Sources, Edit and Add.
  2. Type in http://i.unlock.no/ and Ok then Done.
  3. Now tap on Install at the bottom and scroll down to the Unlocking Tools category
  4. Install SMS Fix
  5. When done installing, reboot your phone and it should work
Note: I have not throughly tested this, so there may be side effects i'm not aware of yet. But you can just uninstall the package to revert the changes. I only tested on 1.1.1.

Iphone Tips Tricks

Configuring EDGE settings (internet)?

If you have firmware 1.01 or later you can go to Settings → General → Network → EDGE to configure EDGE. Check your provider's website for settings.
Note for 1.1.1 users: For some reason v1.1.1 firmware will not save the settings after reboot. I have added a little fix, which is available in my repository for Installer.app: http://i.unlock.no/ - descriptions on adding my repository is (step 1-4) see below

  1. Open installer, and install the update if prompted.
  2. Go to sources and tap Edit and Add
  3. Add this URL: http://i.unlock.no
  4. Tap Done and then Refresh

Philips Secret Codes

PHILIPS SECRET CODES :

*#06# -> Displays imei
*#2254*# -> Status Register: C, BS, RR, MMI, CREAT
*#2255*# -> Activate & Deactivate the "DEBUG CALL"-
*#2558*# -> The time in days, hours & minutes you are connected to the net
*#2562*# -> Not Clear; the phone reconnects to the net
*#2565*# -> Not Clear; Warmstart?
*#3333*# -> (NO) BLOCKING - list (15 Items)
*#2377*# -> "BEER": not clear, the phone waits a random time and reconnects to the net,
sometimes the phone makes a reset
*#3377*# -> Init, Flags, SIM LCK
*#3353*# -> Resets the (NO) BLOCKING - list
*#7378*# -> Name, Length, SIM phase
*#7489*# -> SECURITY CODE
*#7693*# -> You can activate & deactivate the SLEEP MODE
(when deactivated the battery will go down)
*#7787*# -> Not clear: SPURIOUS INTERRUPT
*#7948*# -> SWITCH OFF: not clear; it is a timer or something
*#8463*# -> Some information about the SLEEP MODE
Philips Genie (TCD838)
*#2337*# -> Will activate the beep signal when the cellphone reconnected to the net

Philips

#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset

Philips Xenium 9@9D (CT2898)
*#06# - IMEI
*#2355*# - NetMonitor
*#4732*# - "Downloading" SW 02530003
*#6837*# - "Version" SW 02530003 Pack_resid EastEurope
Only this code from *#2000*# to *#8000*# was accepted by phone.

Sony Ericsson K700 Joystick Solution Full Jumper Ways

The full solution for K700 joystick problem :


Sony Ericsson K300 No Mic No Charging Solution

No mic and no charging solution for Sony Ericsson K300, below the scheme picture :


Samsung E770 Keypad Solution

Have a problem with Samsung E770 keypad? Here is the solution :


SAMSUNG E720 Keypad Ways PCB Front

Front PCB of Samsung e720 keypad solution :


Samsung E350 Top Keypad Ways Problem

Here is SAMSUNG E350 keypad solution :

Samsung E330 Keypad Solution

Complete scheme picture SAMSUNG E300 :

1.

2.

3.

4.

SHARP 903SH Totally Deadphone Solution

For CID 73
- Flash 903 SH CID 73 unlocked - TP
- Unlock - TP
- Press Hold "Power" + "#" button

For CID 24 :
- If direct unlock fail, flash using patch and unlock
- Press Hold "Power" + "#" button

O2 XDA Hard Reset

Hard reset utk XDA II :

Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

VIDEO Tutorial - Uploading Files Using Xs++ V3 Without REST Files

Here is the VIDEO TUTORIAL Uploading Files Using Xs++ V3 Without REST Files.

Preview archive:


DOWNLOAD HERE
http://rapidshare.com/files/...V3_Without_REST_Files_and_Fakes_Video.rar

 

. Mobile Phone Guide . - 2008 - Repair For Free! - Privacy Policy